1 GB KVM VPS
$21.99/year
- 1 vCPU Core
- 20 GB SSD Storage
- 1 GB RAM
- 3 TB Monthly Transfer
- 1Gbps Network Port
- Full Root Access
- 1 IPv4 Address
- KVM/ctrl Panel
- Deploy in Multiple Locations
High-performance KVM VPS, perfect for self-host and AI workloads! Every plan includes full root access, one-click apps, and access to ctrl - RackNerd’s modern control panel. RackNerd is trusted by hundreds of thousands of customers globally, and recognized on the Inc. 5000.
Launch a KVM VPS and choose from Ubuntu, Debian, AlmaLinux, and more! Full root SSH access included, and custom ISO installs are also available upon request via a support ticket.
$21.99/year
$35.99/year
$59.99/year
$89.99/year
$119.99/year
Reliable, high-performance KVM VPS backed by real support. Order with a provider that has a proven track record and is here to stay.
Your VPS is provisioned right after payment, so you can get online in minutes.
Choose a datacenter close to your users for lower latency on every plan.
Full KVM for dedicated resources, stronger isolation, and steady performance.
Reboot, reinstall, console, firewall, and one-click apps from one modern panel.
Our support team is available around the clock when you need a hand.
Every special includes a 1Gbps port for fast, reliable connectivity.
Install AdminBolt, OpenClaw, AnythingLLM, Ollama, LibreChat, and more from ctrl in a single click.
Filter inbound traffic in front of your VPS, with rules you manage right from ctrl.
Explore the navigation, manage a VPS, try the network firewall, browse One-Click Apps, and even try an installation - no account required. This interactive demo is a preview of the ctrl experience - exclusively available on RackNerd VPS services!
Manage your RackNerd VPS instances from one place.
Welcome
RackNerd ctrl panelRestart or power your server on and off, reinstall or change the operating system, monitor bandwidth, and more - all from here.
| Hostname | IP Address | Operating System | vCPU | Memory | Disk | |
|---|---|---|---|---|---|---|
| ai-builder.demo | 203.0.113.42 | Ubuntu LTS | 4 Cores | 8 GB RAM | 80 GB | |
| n8n-workflows.demo | 203.0.113.77 | Ubuntu LTS | 2 Cores | 4 GB RAM | 40 GB |
/ Manage
203.0.113.42 · Los Angeles, USA
Ubuntu LTS
1.72 TB of 5 TB Used / 3.28 TB Free
32.8 GB of 80 GB Used / 47.2 GB Free
/ / Reinstall
203.0.113.42 · Choose a fresh OS template
Preparing OS template…
/ / Console
HTML5 VNC console preview
Within ctrl, you can access out-of-band HTML5 VNC console! Perfect for troubleshooting and recovery, or for custom OS installations.
/ / One-Click Apps
For your convenience, RackNerd offers several applications that can be deployed with a single click. Don’t see what you need? Full root SSH is included.
AdminBolt is a modern, affordable hosting control panel that brings website, email, DNS, SSL, WordPress, and database management together in one easy-to-use interface. Install AdminBolt in one click through ctrl and enjoy a 30-day free trial.
Self-hosted AI assistant for automating tasks, workflows, messaging, and connected services.
Self-hosted AI agent with a web dashboard for chat, tools, messaging gateways, and automation. Configure your own LLM API key after install.
Self-hosted workflow automation platform for connecting apps, APIs, databases, and services.
Self-hosted AI workspace for document chat, agents, and private knowledge bases. Connect your own LLM provider after install.
Self-hosted chat for open-source language models. Ollama runs the models, and Open WebUI is the chat interface.
Self-hosted chat interface for multiple AI providers, with accounts and conversation history on your server.
Web-based Docker container management for deploying and managing containers, images, and stacks.
Self-hosted PaaS for deploying apps, databases, and services with automatic SSL and Git-based workflows.
Web-based Linux system administration for managing Linux users, services, packages, and system settings.
Web hosting control panel for managing and hosting websites, email, DNS, databases, SSL, and more.
Modern web hosting control panel for PHP, Node.js, Python, and static sites with NGINX, free SSL, and MySQL.
WireGuard VPN with the wg-easy web UI for creating clients, QR codes, and managing peers.
/ / ctrl Network Firewall
203.0.113.42 · Optional inbound filter in front of your VPS
No firewall is currently enabled on our side for this VPS.
By default, we do not block any ports. If a port is unreachable, check your operating system firewall first.
For an extra layer of protection, you can enable the ctrl Network Firewall. This optional filter sits on our side of the network, before traffic reaches your server’s operating system.
You have saved rules from earlier in this demo. Re-enable them, or enable as new instead.
Status: Active · Mode: Recommended
Inbound traffic passes through the ctrl Network Firewall before reaching your VPS and its OS firewall (such as UFW, firewalld, or iptables). If a port is blocked, you may need to allow it in both places.
ctrl Network Firewall (this page)
Runs on our side of the network, outside your VPS. It can block inbound traffic before your server receives it.
OS firewall (inside your VPS)
Your second layer, using tools such as UFW, firewalld, or iptables when you have one set up. Use it for finer control this page does not cover, for example source-IP limits or outbound filtering.
Traffic flow
Internet → ctrl Network Firewall → OS firewall (if applicable) → application
Console access
Console / VNC does not pass through the ctrl Network Firewall, so you can still correct mistakes from the panel.
You’re on a custom allow list. Pick a preset above to replace it, or keep editing ports below.
Only listed ports are allowed. Everything else inbound is blocked while Active.
0 / 12 rules used. A port range counts as one rule.
| Protocol | Port | Note |
|---|
Turns the filter off immediately in this demo. Saved rules are kept if you want to re-enable later.
Manage your profile, password, and security settings.
Keep your contact details current so we can reach you about your services.
Choose a strong password you do not use anywhere else. You will need your current password to confirm the change.
Two-factor authentication
Add an extra layer of protection with a code from your authenticator app.
Recovery codes remaining: 8
| Date / time (UTC) | IP address |
|---|---|
| Sep 24, 2026 00:49 (2 hours ago) | 203.0.113.88 |
| Sep 23, 2026 02:49 (1 day ago) | 198.51.100.44 |
| Sep 21, 2026 02:49 (3 days ago) | 203.0.113.88 |
| Sep 17, 2026 02:49 (1 week ago) | 192.0.2.17 |
RackNerd is proud to be recognized among America’s fastest-growing private companies, including the Inc. 5000, Inc. Regionals Pacific, and the 2026 Inc. 5000 national list.
More questions about a RackNerd VPS special? Contact us.
Yes. These RackNerd VPS specials are lifetime recurring. You can renew at the same rate for as long as you decide to keep the service.
ctrl is RackNerd’s modern control panel, included with every RackNerd VPS special. After your VPS deploys, ctrl is where you manage it: reboot, reinstall the operating system, open an out-of-band HTML5 VNC console, install one-click apps, set inbound rules with the ctrl Network Firewall, reset the root password, and upgrade. The console is there for troubleshooting, recovery, and custom OS installations.
We’re always looking to add more popular options to the one-click catalog in ctrl. If the app you want is not listed yet, a RackNerd VPS special still leaves you in control. You get full root SSH access, so you can install and configure whatever stack you need.
Yes. A RackNerd VPS special is a KVM VPS made for self-hosting and AI workloads. Every plan includes full root access, one-click apps in ctrl, and a 1Gbps port. Install AdminBolt, OpenClaw, Hermes Agent, AnythingLLM, Ollama, LibreChat, n8n, and more from ctrl, or bring your own software over SSH.
Yes. On a RackNerd VPS special you can run Docker with Portainer in one click from ctrl, or install Docker yourself over SSH. WordPress fits AdminBolt, CyberPanel, or CloudPanel, which are also one-click apps, or you can set it up on your own. Full root access means a custom stack is always an option.
When you order a RackNerd VPS special, you can choose CentOS, Rocky Linux, AlmaLinux, Fedora, Debian, or Ubuntu. Custom ISO installs are available on request through a support ticket. Later, ctrl can reinstall the OS, and the HTML5 VNC console is there if you want to install from your own media.
Yes. Every RackNerd VPS special includes full root access, 1 IPv4 address, SSD storage, and a 1Gbps network port. You manage the server from ctrl or over SSH.
A RackNerd VPS special is provisioned right after payment, so you can get online in minutes. You can deploy in multiple RackNerd locations and pick a datacenter close to your users.
Yes. OpenClaw, Hermes Agent, AnythingLLM, Ollama, LibreChat, n8n, and Coolify are one-click apps in ctrl on a RackNerd VPS special. OpenClaw wants at least 8 GB of RAM. Hermes Agent, AnythingLLM, Ollama, and LibreChat want at least 4 GB. n8n or Coolify are comfortable from 2 GB. After the VPS deploys, open One-Click Apps in ctrl, select the app, and credentials show up in-panel when it’s ready.
A RackNerd VPS special is an unmanaged KVM VPS. You get full root access, and ctrl covers the day-to-day work: power, reinstall, console, one-click apps, and the ctrl Network Firewall. If you need a hand with the platform, RackNerd support is available 24/7.